Which size of magnetic holder/one-touch fits best?

[bjho852]

I have one card that has the same thickness as the card below...

...and I would like to put it into a magnetic holder/one-touch (just like the card above).

Which size of magnetic holder/one-touch fits best?

Thank you.

 

[xavierty]

i would go 100 to give it some room to breath.....

 

[bjho852]

That's my thought as well - I am deciding between 75pt and 100pt now, but not completely sure.

Any other opinion?

 

[1s1ah]

I found this link to be helpful with for the same question.
http://www.ebay.com/gds/Sports-Card...pes-Are-Best-For-Me-/10000000000707064/g.html

 

[silvertapoutstar]

id say a 75pt is perfect, these are 55pt cards, so the 75 gives it that tiny bit of spance but a 100pt would give it too much imo

 

[WoobieZarz]

Side note, I've got both normal and silver for Harris out of this set, and the Silver is actually larger than the normal, and does not fit a one-touch holder. I have to top-load it.

 

[Billyhoyle]

Glossary of Terms

 

[Andrew Thomson]

a stupid question do you still keep a sleeve on your cards in the one touch ?

 

[WoobieZarz]

a stupid question do you still keep a sleeve on your cards in the one touch ?

I've never. Could quite possibly damage the edges of a card by doing so.

 

[Andrew Thomson]

cheers so no sleeve is best

 

[banzini]

ps: Sick card mate!

 

[WoobieZarz]

cheers so no sleeve is best

I've actually seen tonight where some folks put an empty sleeve on the face of the card after it's inserted into the base/cradle of a one-touch, and then the cover of the one-touch is put in place.

So it might act as a surface protector in that sense. Havent tried it myself.

 

[bjho852]

It looks like I will settle for a 75-pt one, but I have purchased both a 75-pt and a 100-pt holders just recently. Thank you so much for all your helpful answers and links.
I actually might buy one size for each different thickness in the future just to try and see which one is best for different cards.

Again, thank you.

 

[WoobieZarz]

That's what I did, bought a heap of different holders (going back a few years now), and just tried them out. Then took note of which was which, and ordered more based on the needs for what cards I had.

Troubles these days, is there's so many different thickness's, it's hard to keep track.

 

[FreshJays23]

Here what i use to tell trading card size

http://www.ebay.com/gds/How-to-dete...f-your-Sports-Cards-/10000000011758812/g.html

On thicker cards i usually go one up. I had some cards on the weekend that were 75PT but didnt fit into a 75PT holder but fit perfect in a 100PT